A CENTRIFUGE if used with pilot study back up gives maximum Dry Cake Output. We being a group of Chemical Engineers; can give thorough insight in the use of centrifuge at its best.
Our machines have more Cake through-put per batch. The cake dryness available is the maximum. With the outstanding experience of manufacturer of more than two thousand machines
" ACE™" can give you the STURDY; LONG LASTING TROUBLE FREE MACHINE WHICH WORKS
AT THE OPTIMUM OF ITS PROCESS REQUIREMENTS.
The promoter of ACE™ being a Chemical Engineer can give machine mechanically and chemically outstanding. You can get a machine from an establishment as 3 decades old.
The EXPERIENCE counts the most in achieving the best results in quality and quantity. Having been in FILTRATION TECHNIQUES since graduation; the promoter of ACE™ has many milestones to his credit. The Director, C.S.T.R.I- BANGALORE; National Chemical Laboratories-Pune; Birla Research Institute Nagda, Teva Drugs Ltd. (Gajraula), Indian Oil Corp Ltd. (Gurgaon), Reliance Industries Ltd, Jamnagar; Ital Techno (Italy- Modena), Thai Polyphosphate & Chemicals Ltd- Bangkok has all the benefits out of R & D machine from ACE™. Many have established their large scale units with ACE machines.
WE FOLLOW THE FOLLOWING GUIDE-LINES STRICTLY.
1. Raw material testing by Chemical & Physical means.
2. Cast Iron grade approval by Chemical and Physical means.
3. Precise machining of each component as per our spare part machining drawings.
4. Procurement of IMPORTED BEARINGS AND testing its GENUINENESS.
5. Rolling and dishing of the steel plates as per our required standard & sizes.
6. ARGON WELDING OF S.S.BASKET, SS BODY AND ALL S.S. PARTS as per our & general arrangement drawing.
7. Assembly of the bearing housing under controlled hydraulic pressure.
8. Assembly of the three Point Suspension on our SPECIAL UNIVERSAL FOUNDATION.
9. Running trail of the bearing housing to check the sound and ensure trouble free running of the bearing housing.
10. Checking of SPRING-TENSIONS and true alignment of body; motor housing.
11. Alignment of basket.
12. Dynamic Balancing of the baskets as per ISO standard.
13. Assembly of the basket; Body and Lid to give leake proof running.
14. Brake Assembly.
15. Empty basket running for three to four hours.
16. IMBALANCE TEST LOAD WITH 2% OF THE CAKE LOAD by putting a weight in a corner of the basket & running the machine for hours.
17. Testing the machine running with positive nitrogen pressure.
18. Current Testing of Electric motor at all the steps.
19. Re-checking of all the nut bolts & fittings.
20. Safety point approval.
Our centrifuge machine is tested and delivered only after all the above check points are approved.
OUR MACHINES ARE APPROVED BY LEADING CHEMICAL CONSULTANTS LIKE :
— DALAL CONSULTANTS; HUMPHREYS;
— IBI;
— TATA CONSULTANTS;E.I.L.;
— DAVY POWER GAS etc.etc.,
WE WELCOME THIRD PARTY INSPECTION.
OUR MACHINES ARE GUARANTEED FOR TROUBLE FREE RUNNING FOR 18 MONTHS FROM THE DATE OF DESPATCH OR 12 MONTHS FROM THE DATE OF COMMISSIONING.
OUR TECHNICIANS CAN ASSIST IN SITE INSTALLATION & COMMISSIONING AT NOMINAL CHARGES. |